| Tipo de Pago: | T/T,Paypal |
| Incoterm: | FOB,CFR,CIF,EXW,DDU,DDP |
| Cantidad de pedido mínima: | 1 Kilogram |
| transporte: | Ocean,Land,Air,Express |
| Hafen: | Shenzhen,Guangzhou,Hongkong |
Modelo: Duratron ®U 2200 PEI
Marca: Duratrón
| Unidades de venta | : | Kilogram |
| Tipo de paquete | : | Paquete de exportación |
Las formas de poletherimida Duratron® U2200 PEI son 20% reforzadas con el vidrio, lo que les da rigidez y estabilidad dimensionales excepcionales, alta resistencia a la temperatura y un bajo coeficiente de expansión térmica lineal. Con una relación de resistencia / peso excepcional y una mayor resistencia a la tracción, este grado también es un gran aislante eléctrico para aplicaciones de semiconductores y electrónicos.
Propiedades materiales
20% reforzado con vidrio
Alta resistencia y se realiza en uso continuo a 340 ° F (170 ° C)
Rigidez excepcional y estabilidad dimensional
Bajo coeficiente de expansión térmica lineal (CLTE)
Geometrías disponibles
Las formas de stock de PEI Duratron® U2200 abarcan un rango de tamaños estándar en las siguientes geometrías: varilla, placa
Colores disponibles
Duratron® U2200 Las formas de stock de PEI vienen en los siguientes colores: marrón
Propiedades típicas de Duratron ® U 2200 PEI 20% de vidrio
| DETAIL | |||
| Description | Value | ||
| Material Type | Imidized Amorphous Thermoplastic | ||
| Chemical Name | PEI Polyetherimide | ||
| Trade Name | Duratron®U2200 | ||
| Additives | 20 Glass | ||
| Color | Tan | ||
| Manufacturer | Mitsubishi Chemical Advanced Materials | ||
| PHYSICAL | |||
| Property | Test | Unit of Measure | Value |
| Density | ASTM D792 | g/cm³ | 1.42 |
| ASTM D792 | lb/in³ | 0.051 | |
| Water Absorption, 24 hrs, Immersion | ASTM D570 | % by wt. | 0.19 |
| Water Absorption, Saturation, Immersion | ASTM D570 | % by wt. | 1.1 |
| MECHANICAL | |||
| Property | Test | Unit of Measure | Value |
| Tensile Strength | ASTM D638 | psi | 16900 |
| Tensile Modulus | ASTM D638 | psi | 700000 |
| Tensile Elongation at Break | ASTM D638 | % | 3 |
| Flexural Strength | ASTM D790 | psi | 25000 |
| Flexural Modulus | ASTM D790 | psi | - |
| Compressive Strength | ASTM D695 | psi | 28000 |
| Hardness | ASTM D785 | NA | Rockwell M114 / R127 |
| IZOD Impact-Notched | ASTM D256 | ft-lb/in | 0.8 |
| THERMAL | |||
| Property | Test | Unit of Measure | Value |
| Coefficient of Linear Thermal Expansion | ASTM D696 | x 10-5 in./in./°F | 1.4 |
| Heat Deflection Temp | ASTM D648 | °C at 264 psi | 208 |
| ASTM D648 | °F at 264 psi | 408 | |
| Max Continuous Operating Temp | °C | 171 | |
| °F | 340 | ||
| Minimum Operating Temp | °C | -50 | |
| °F | -58 | ||
| Thermal Conductivity | ASTM C117 | BTU-in/ft²-hr-°F | 1.43 |
| Flammability Rating | UL94 | NA | V-0 |
| ELECTRICAL | |||
| Property | Test | Unit of Measure | Value |
| Dielectric Constant at 1 MHz | ASTM D150 | NA | - |
| Dissipation Factor at 1 MHz | ASTM D150 | NA | 0.0015 |
| Surface Resistivity | EOS/ESD S11.11 | ohm/square | > 10^13 |
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Contact Now