| Tipo de Pago: | T/T,Paypal |
| Incoterm: | FOB,CFR,CIF,EXW,DDP,DDU |
| Cantidad de pedido mínima: | 1 Kilogram |
| transporte: | Ocean,Land,Air,Express |
| Hafen: | Shenzhen,Guangzhou,Hongkong |
Modelo: SUSTAPEI GF 30 (ULTEM™ 2300)
Marca: Sostenimiento
| Unidades de venta | : | Kilogram |
| Tipo de paquete | : | Paquete de exportación |
The file is encrypted. Please fill in the following information to continue accessing it
Sustapei GF 30 (Ultem ™ 2300) es 30% reforzado con vidrio y proporciona una mayor rigidez, resistencia y estabilidad dimensional para aplicaciones estructurales.
Características
Temperatura de deflexión altas al calor
Retardante de la llama alta
Desarrollo de humo muy bajo
rigidez muy alta, resistencia a la tracción y dureza en un amplio rango de temperatura
Estabilidad de alta dimensión bajo calor
Propiedades clave
HDT más alto que Pei sin relleno
Mayor resistencia y rigidez que Pei sin relleno
Limitaciones
Resistencia química a solventes orgánicos e hidrocarburos aromáticos (incluye muchos aceites, combustibles y grasas)
Aplicaciones
Manifes y conectores de manejo de fluidos
Aisladores electrónicos / eléctricos
Instrumentación analítica
Dispositivos médicos
Componentes de la aeronave
Componentes semiconductores
Propiedades típicas de Sustapei GF 30 Ultem ® 2300
| Description | Value | ||
| Material Type | Amorphous Thermoplastic | ||
| Chemical Name | PEI Polyetherimide | ||
| Trade Name | SustaPEI GF 30 | ||
| Additives | 30% Glass | ||
| Color | Tan | ||
| Manufacturer | Rochling | ||
| PHYSICAL | |||
| Property | Test | Unit of Measure | Value |
| Density | ASTM D792 | g/cm³ | 1.51 |
| ASTM D792 | lb/in³ | 0.055 | |
| Water Absorption, 24 hrs, Immersion | ASTM D570 | % by wt. | 0.2 |
| Water Absorption, Saturation, Immersion | ASTM D570 | % by wt. | 1.2 |
| MECHANICAL | |||
| Property | Test | Unit of Measure | Value |
| Tensile Strength | ASTM D638 | psi | 20,000 |
| Tensile Modulus | ASTM D638 | psi | 900,000 |
| Tensile Elongation at Break | ASTM D638 | % | 3 |
| Flexural Strength | ASTM D790 | psi | 33,000 |
| Flexural Modulus | ASTM D790 | psi | 950,000 |
| Compressive Strength | ASTM D695 | psi | 31,000 |
| Hardness | ASTM D785 | NA | Rockwell M115 |
| IZOD Impact-Notched | ASTM D256 | ft-lb/in | 1 |
| Dynamic Coefficient of Friction | NA | 0.24 | |
| THERMAL | |||
| Property | Test | Unit of Measure | Value |
| Coefficient of Linear Thermal Expansion | ASTM D696 | x 10-5 in./in./°F | 1.1 |
| Heat Deflection Temp | ASTM D648 | °C at 264 psi | 210 |
| ASTM D648 | °F at 264 psi | 410 | |
| Melting Point Temp | ASTM D3418 | °C | 228 |
| ASTM D3418 | °F | 442 | |
| Max Continuous Operating Temp | °C | 171 | |
| °F | 340 | ||
| Minimum Operating Temp | °C | -50 | |
| °F | -58 | ||
| Thermal Conductivity | ASTM C117 | BTU-in/ft²-hr-°F | 1.8 |
| Flammability Rating | UL94 | NA | V-0 |
| ELECTRICAL | |||
| Property | Test | Unit of Measure | Value |
| Dielectric Strength | ASTM D149 | V/mil | 770 |
| Dielectric Constant at 1 MHz | ASTM D150 | NA | 3.7 |
| Dissipation Factor at 1 MHz | ASTM D150 | NA | 0.002 |
| Surface Resistivity | ASTM D257 | ohm/square | 10^16 |
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Contact Now